- Intel Socket:1700, 1200, 1155, 1151, 1150
- Ram Clearance:unlimited
- Warranty:6 Years
- Operating Ambient Temperature:0 - 40 °C
- Heat Pipes:4
- Fin Material:Aluminum
- Number of Fins:54
- Fin Thickness:0,4 mm
- Thermal Paste:MX-5 (0.8g)
- Fan Size:120
- Fan Speed:200 - 1700 rpm
- Fan Bearing:Fluid Dynamic Bearing
- Noise Level:0.35 Sone
- Current:0.12 A
LEDs:12 A-RGB LEDs
Connector:3-Pin 5V-DI-GND Connector
Current / Voltage:0.4 A / 5 V
Cable:450 mm cable with 80 mm sharing cable, black
Arctic Freezer i35 ARGB
The Freezer i35 A-RGB is already compatible with Intel's Alder Lake LGA 1700 processors. Even though the socket has increased in size compared to its predecessor, the hotspot remains centred in the area of the CPU die. The Direct Touch heat pipes of the Freezer i35 A-RGB cover this area completely.
Optimised performance meets modern, black design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.
The Freezer i35 A-RGB comes with a 0.8 g syringe of the new MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.
The fan installed in the Freezer i35 A-RGB benefits from all the advantages of the P-fans. With their low-vibration, power-saving motor and hydrodynamic plain bearing, they combine quiet and efficient operation. Despite its high fin density, the fan guarantees a high static pressure with its focussed air flow and is therefore ideal for use on radiators and heat sinks. The speed of the fan can be dynamically controlled via PWM and can thus be optimally adapted to any scenario.
The Freezer i35 A-RGB is a socket-specific installation variant for Intel Socket LGA 1700, 1200 and 115x. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer i35 A-RGB. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.
6 Years Warranty